Products
- Home »
- Cycle Parking »
- Cycle Clamps »
- F-10 /F-11 Cycle Clamp
F-10 /F-11 Cycle Clamp
A range of cycle clamps suitable for all types of front wheel up to
a tyre width of 50 mm. Also suitable for mountain bikes. This is due to the special design of the wheel support which has been hot-dip
galvanised. This series features a low and a high clamp: the
F-10(M) and F-11(M) respectively.
These models are often alternated in order to give the benefit of high/low. We thereby recommend a centre to centre distance of 375 mm. When using only low clamps, the recommended distance is 650 mm. Equipped with 150 mm anchor as standard.
The clamps can be installed at 90º or 45º depending on the orientation required. Both products are available in two versions: in Ø22mm galvanised steel tube as F-10 / F-11 or in Ø20mm solid round bar as F-10M / F-11M.
- Article number: 01.170.000
- F-10 cycle clamp, single-sided low, with 150mm anchor part
- Article number: 01.171.000
- F-11 cycle clamp, single sided high, with 150mm anchor part
- Article number: 01.175.000
- F-10M cycle clamp, solid bar single-sided low, with 150mm anchor part
- Article number: 01.176.000
- F-11M cycle clamp, solid single-sided high, with 150mm anchor part